Design glass

Finely refined glass

AGC Interpane has been using classic screen printing and sandblasting to refine glass for decades, for example as transparent or frosted glass doors – or as the internationally popular “silk-screen print” to individualize global glass facades, reduce the g-value or ensure privacy.

Ceramic digital printing is ideal for fast and cost-effective glass design both indoors and outdoors – even for Los1. Glass surfaces are finished in high-resolution and intense colors according to specifications and taste.

Reflective partial coating for facades and interiors

Behind ipachrome is a multi-layer system with a light reflectance of over 50 percent – making it as highly reflective as a conventional silver mirror, but considerably more resilient. The coating can be toughened and processed into laminated safety glass, combined with iplus thermal insulation as well as ipasol and Stopray and further processed into insulating glass, for example.

Whether for exterior or interior use, as facade glazing or in store and trade fair construction, whether logos, texts or free ornaments, whether fine lines or opaque surfaces: Thanks to its partial coatability, ipachrome opens up scope for individual design ideas. Motifs can be applied to glass surfaces as masking. This is followed by ipachrome coating and subsequent unmasking. The end result is a detailed and intricately mirrored pane with deep contrast. The glazing thus becomes a visually attractive design component with a high attention value – without compromising on functionality.

Translucent acid frosted glass

With its high-quality acid-etched surface, the translucent Matelux strikes the difficult balance between translucency and privacy. Our industrial process for acid matting on large panes is subject to strict quality control to ensure perfect homogeneity.

Architects and designers appreciate Matelux for its uniform satin finish and wide range of colors (three clear glass and three lacquered options) and special options.

• Matelux Light: Light acid frosted, bright and translucent float glass with a satin feel.
• Matelux Double Sided: Acid frosted, light-colored and translucent float glass on both sides with ideal suitability for doors.
• Matelux Anti-slip: Etched structure specially developed for floors and stairs.
• Matelux Stopsol Supersilver Clear: Float glass coated on one side with reflective Stopsol. The other side is acid frosted. Ideally suited for balustrades in combination with Stopsol Supersilver Clear.
• Matelux is processed in the same way as conventional float glass and, with its satin look and feel, is the ideal enhancement for indoor and outdoor areas.

Learn more:

• Product page agc-yourglass.com

Toughenable, rear-lacquered glass with matt surface

Matelac T is a float glass with a high-quality lacquer finish on the back and a satin finish on the front. Like its glossy counterpart Lacobel T, it can be cut and toughened directly by the finisher, which streamlines the production process and shortens delivery times. Scratch-resistant and resistant to temperature fluctuations, Matelac T is equally suitable for exterior and interior applications.

AGC strongly recommends that Matelac T products are processed by an AGC certified processor to ensure a consistently high quality of the processed glass.

Learn more:

• Product page agc-yourglass.com

Lacquered glass with matt surface on the back

Matelac is a high-quality lacquered float glass on the back, which is acid-matt on the opposite surface. The satin aesthetics of Matelac can be perfectly combined with its glossy counterpart Lacobel for a pleasant change of material.

Our matt lacquered Matelac float glass offers countless possibilities for interior design, such as cladding walls or furniture. The decorative glass can be cleverly combined with a variety of materials, such as wood, stone and metal. For added safety, a transparent SAFE+ film made of polypropylene can be applied to the painted side of Matelac, which holds the glass fragments together in the event of breakage and thus protects against injury. Matelac decorative glass is available in 7 colors.

With our “MyColour” service, you can also create individual colors with a certain quantity purchase to match the glazing to your corporate design, for example.

Learn more:

• Product page agc-yourglass.com

Toughenable glass with glossy surface, lacquered on the back

Lacobel T is the first product series of back-painted glass that is cut and toughened directly by the fabricator, which streamlines the production process and shortens delivery times. Scratch-resistant and resistant to temperature fluctuations, Lacobel T is equally suitable for exterior and interior applications.

AGC strongly recommends that Lacobel T products are processed by an AGC-certified processor to ensure the consistently high quality of the processed glass.

Learn more:

• Product page agc-yourglass.com

Lacquered glass on the back with “glossy” aesthetics

Lacobel is a float glass coated on the back with high-quality lacquer. The glossy appearance of Lacobel can be perfectly combined with its matt counterpart Matelac for a pleasant change of material.

Our Lacobel lacquered float glass offers you countless possibilities for interior design, such as cladding walls or furniture. The decorative glass can be cleverly combined with a variety of materials, such as wood, stone and metal. For added safety, a transparent SAFE+ film made of polypropylene can be applied to the lacquered side of Lacobel, which holds the glass splinters together in the event of breakage and thus protects against injury. The glossy decorative glass is available in 13 colors.

With our “MyColour” service, you can also create individual colors with a certain quantity purchase to match the glazing to your corporate design, for example.

Learn more:

• Product page agc-yourglass.com