Consultation & Contact

Global
Architecture

High-end glazing for architects and façade builders around the world

Global Architecture

The best architects and façade builders in the world are among our customers – unique buildings are being realised around the globe with high-end glazing from AGC Interpane. As part of AGC Glass Europe, we are one of the most important manufacturers in Europe.

High-end glazing for iconic architecture around the world

Our high-end glazing is used by leading architectural firms and facade construction companies to create impressive glass facades all over the world.

Impressive not only because our coated fixed glazing – insulating glass made to measure for you – has been at the forefront of technical values for decades, but also because we have been leading the way in terms of sustainability for decades. Our low-carbon products saves CO2 in production and downstream processes, and the CO2 footprint of our standard base glass is also significantly smaller than the industry average.

Almost all of our products are Cradle to Cradle certified and offer you decisive advantages with Environmental Product Declarations (EPD) for the environmental certification of your buildings in accordance with DGNB, LEED, BREEAM or WELL.

Last but not least, we not only provide you with tailor-made products, but also tailor-made advice – we accompany you from the start of planning to the completion of your building.

We also provide you with the best advice for the perfect realization of your architectural vision.

Project consulting
Technical Advisory Service (TAS)
Sales
Solar protection

Contemporary architecture is glass architecture. Architects worldwide are making bold statements with generously glazed surfaces. Ever more bold architectural designs and higher demands on the energy balance and sustainability of buildings require innovative glass technologies. AGC Interpane supports you with decades of project expertise and high-end solar protection glass from the Stopray, ipasol and Stopsol brands – with certified quality in accordance with EN ISO 9001, EN ISO 50001, OSHAS 18001 and EN ISO 14001.

Thermal insulation

Energy-efficient and sustainable buildings are a must today. Thermal insulation glass with Ug values below 1.0 W/(m²K) brings plenty of daylight into the room and enables solar energy gains in the cold months. At the same time, our iplus coating ensures that heat is reliably retained in the room, so that even larger glass surfaces can be realized with our double or triple glazing without any loss of comfort. Iplus thermal insulation glazing can be combined with many other functions such as solar control, sound insulation and safety glass.

Safety

Elements made of glass shape the image of modern architecture. The opportunity to use our ipasafe safety glazing as a structural element enables architects and facade builders to realize innovative designs. Ipasafe glazing combines active, passive and constructive safety properties: it provides active protection against burglary, bullets and damage to people, passive safety to protect against injuries caused by glass breakage and constructive safety through high residual stability and residual load-bearing capacity in the event of failure.

Large formats

The global demand for oversized glazing products is increasing. AGC Interpane’s ‘Giga Lites’ are the go-to solution for architects who want to create exclusive glass architecture by cladding entire facades with just a few large glass panels. Measuring up to 19.00 x 3.21 meters, these giant glass panels are among the largest functional coated glazing products available worldwide, with a maximum thickness of 20 millimeters.

Sound insulation

Environmental protection in its entirety requires not only noise protection, but also the protection of natural resources. Therefore, a modern soundproof insulated glass must also reduce heat transmission losses. That’s why our ipaphon soundproof glass is standard-equipped with our high-quality iplus coating. All types can be combined with almost all Stopray and ipasol coatings for additional functions.

Solar applications

Glass is a crucial component in both new and traditional solar applications. Anti-reflective coatings enhance energy transmission through the glazing, allowing collectors to operate more efficiently at shallower angles during morning and evening hours. With the new SolarColor brand, we design GIPV (building-integrated photovoltaics) attractively to meet the needs of architects and façade planners – with high colour flexibility and excellent energy yield at the same time. In contrast, building-integrated photovoltaics (BIPV) in glass is offered by SunEwat XL, which boosts the energy balance of every building through active power generation in the facade, leading to a rapid payback on investment for new and refurbished facades.

Design glass

Frosted or glossy, translucent or opaque, high-reflective partial coatings, digital and screen prints or ceramic digital prints of high-resolution motifs – design glasses enhance walls and furniture in interior design and sometimes entire facades in exterior design. Discover the variety of our solutions.

Our products

We have been known as a brilliant glass finisher for over half a century. In our modern project centres in Plattling and Lauenförde, AGC INTERPANE ARCHITECTURAL GLASS GmbH gives your glass special functions through perfect coatings and then guarantees excellent sun protection, thermal insulation, soundproofing, high security and much more.

We have been known as a brilliant glass finisher for over half a century. In our modern project centres in Plattling and Lauenförde, AGC INTERPANE ARCHITECTURAL GLASS GmbH gives your glass special functions through perfect coatings and then guarantees excellent sun protection, thermal insulation, soundproofing, high security and much more.

We are happy to advise you

Architectural consulting / project consulting

For the perfect realisation of your architectural vision, you will also receive the perfect advice from us.
If you need planning support for your projects or would like an on-site consultation, you will find support from our architectural consultants. If you have any technical application questions about our products, please get in touch with one of our contacts at the AGC Interpane Technical Advisory Service (TAS). If you have any questions about the sale of our glazing, our locations will be happy to assist you.

Architectural Consultancy (IBP)

Application Consultancy (TAS)

Sales & distribution

  • Norway

    Jens Mallok
    Country Manager DK, SWE, NOR, Management + Sales Häsen

    T+49 33084 798-0
    F+49 33084 798-23
    jens.mallok@agc.com


    AGC INTERPANE GmbH
    Timpbergstraße 15
    16775 Löwenberger Land/OT Häsen
    Germany

  • Sweden

    Jens Mallok
    Country Manager DK, SWE, NOR, Management + Sales Häsen

    T+49 33084 798-0
    F+49 33084 798-23
    jens.mallok@agc.com


    AGC INTERPANE GmbH
    Timpbergstraße 15
    16775 Löwenberger Land/OT Häsen
    Germany